Latest V3 model!
Features:
World-class super bright Cree XM-L emitter, T6 bin
Well over 1000 emitter lumens on high (ANSI tested at a whopping 770 lumens!)
Two output modes:
Turbo mode (head tight) yields full output, with true tactical operation.
General mode (head slightly loosened): Low/Medium/High/Strobe. This mode group has a memory feature, the light will come back on in the brightness level that was last used.
High mode drive current: 3.5 amps
Stainless steel bezel
Mil-Spec Type III Hard Anodizing
Constructed from 7075 aluminum for superior durability.
Tactical momentary-on forward clicky switch
IPX-8 Water Resistance
Tailcap design allows the light to tail stand to serve as a candle for area illumination
Shatter resistant ultra clear lens with double-sided multilayer AR coating
BATTERY OPTIONS: 2 x 18650 / 2 x 17670 / 4 x CR123/ 2 x 18650. (2 x CR123 will run at reduced output, but still very bright!)
Length: 185mm; Head diameter: 58mm; Body diameter:
31mm; Weight: 390g.
Operation:
Press tail switch lightly for momentary on, or fully press to click swith on for continuous operation. Snug the head in the tightened position for Turbo (max) output, slightly loosen the head for general mode which consists of Low/Medium/High/Strobe. To cycle through these levels, turn the light off then quickly half-press (repeatedly) the tail switch. When you reach your desired level, simply hold the switch partially depress, or fully click it on. The general group features mode memory, the light will come back on next time at the previously used level.
6 Key Advantages of the ThruNite Catapult V2:
1. LED - Uses the revolutionary & cutting-edge Cree XM-L LED for extreme brightness - with minimal
artifacts in the beam pattern.
2. Lens - The Catapult uses an ultra clear glass lens with the addition of double side multi-layer AR
coatings to ensure maximum light transmission and efficiency. This results in a 98.5% transmittance
rating.
3. Reflector - Our optimized reflector creates maximum throw. They are designed according to automotive standards for a parabolic reflector. This design is often used in car lamps in the industry.
4. Driver - We use high quality components in our driver to provide an excellent and easy to use User
Interface, and the driver operates at roughly 90% efficiency. Since we have eliminated the MCU inside, it can work well with the higher temperature environments.
5. Design - The light is built as a robust, high quality tool to suit your needs for many years. It is very
ergonomic -- the Catapult is designed with you in mind.
6. Stainless steel bezel replaces the aluminum bezel from previous version and adds to the overall rugged design of the light.
